A bushing in the hub of a wheel, through which the axle passes.
2.
The journal box of a rotating axle, especially a railway axle. Note: In railway construction, the axle guard, or pedestal, with the superincumbent weight, rests on the top of the box (usually with a spring intervening), and holds it in place by flanges. The box rests upon the journal bearing and key, which intervene between the inner top of the box and the axle.
... frames, as shown in Fig. 4. The frames are deep and heavy, being 1 3/8 in. thick, and they are stayed by a substantial box framing at the smokebox end, by a cast-iron footplate at the rear end, and by the intermediate plate stays shown. The axle box guides are all fitted with adjusting wedges. The axle bearings are all alike, all being 7.87 in. in diameter by 9.45 in. long. The axles are spaced at equal distances of 4 ft. 3.1 in. apart, the total wheel base being thus 12 ft. 9.3 in. In the case of the 1st, 2d, and 3d axles, the springs are ... — Scientific American Supplement, No. 384, May 12, 1883 • Various
...
